Using operating menu

After switch-on

After switch-on, the standard display is shown on the LC display panel . Depending on the setting, the transmission frequency, the channel number or the name of the transmitter is displayed.

Displaying the menu settings in display mode

In display mode, and with the lock mode activated, you can display the current menu settings one after the other (see “Overview of the menus” on page 19). After a few seconds, the display returns to the standard display.

 

SET

 

 Slide the multi-function switch to the position  (UP) or 

DOWN

UP

 

(DOWN) to display the menu settings. If you slide the multi-function

 

 

switch repeatedly to the same position, all menu settings are

 

 

displayed one after the other.

 

 

 

Changing to the selection mode

To change from display mode to selection mode, you have to deactivate the lock mode.

Deactivate the lock mode as described in the chapter “Deactivating the autolock function temporarily” on page 13. You can now select the menu whose settings you want to adjust.

Press the multi-function switch (switch position SET). You change to the menu that was displayed in display mode.

Selecting a menu

SET

DOWNUP

Slide the multi-function switch to the position  (UP) or  (DOWN).

 Press the multi-function switch (switch position SET).

The name of the selected menu starts flashing.

Changing to the setting mode of a selected menu

 

SET

 

 Press the multi-function switch (switch position SET).

DOWN

UP

 

You change to the setting mode of the selected menu where you can

 

 

adjust settings. The current setting that can be adjusted flashes on

 

 

the LC display panel .

 

 

 

17