Adjustment tips for the operating menu
When operating a multi-channel system, make sure to only use intermodulation-free frequencies.
There are two options for setting the frequencies:
•You can set a new frequency for the selected channel:
| SET | | | In the selection mode of the “TUNE” menu, press the multi-function |
DOWN | UP | | | switch (switch position SET). The current channel number |
| | | appears on the LC display panel and then the currently assigned |
| | frequency is displayed. |
| | | |
| | | | |
| CH | | | Change the frequency by sliding the multi-function switch to the |
| | | |
| | | |
| MHz | | | position (UP) or (DOWN). |
| | | Store your setting. |
| | | |
MHz
•You can change to a different channel and set a new frequency for the new channel:
Press the multi-function switch (switch position SET) for a longer time. The current channel flashes on the LC display panel.
Select a new channel by sliding the multi-function switch (UP) or (DOWN).
Confirm your selection by pressing the mult-function switch (switch position SET).
The current frequency of the selected channel is displayed.
Change the frequency by sliding the multi-function switch to the position (UP) or (DOWN).
Store your setting.