If a problem occurs ...
If a problem occurs ...
Problem | Possible cause | Possible solution |
No operation | Battery is flat or inserted | Replace the battery or check if it |
indication | incorrectly | is inserted correctly |
Transmitter cannot be | Lock mode is activated | Deactivate the lock mode |
switched off/ |
| |
Settings cannot be |
|
|
changed |
|
|
Receiver: | Transmitter and receiver are not | Set transmitter and receiver to |
No RF signal | on the same channel | the same channel |
| Transmitter is out of range | Check the squelch |
|
| threshold setting on the receiver |
|
| or reduce the distance between |
|
| receiving antenna and |
|
| transmitter |
Audio signal has a high | Transmitter’s sensitivity is set | |
level of background | too high | |
noise |
| |
| Receiver’s output level is set too | Increase the line output level |
| low |
|
Audio signal is | Transmitter’s sensitivity is set | |
distorted | too low | |
|
| |
| Receiver’s output level is set too | Reduce the line output level |
| high |
|
|
|
|
If a problem occurs that is not listed in the above table or if the problem cannot be solved with the proposed solutions, please contact your local Sennheiser partner for assistance.
27