Adjusting settings via the operating menu

When setting up multi-channel systems, please observe the following:

Only the factory-preset frequencies within one frequency bank are intermodulation -free (see page 17). Plug-on transmitter and receiver of a transmission link have to be set to the same frequency. It is vital to observe the notes on frequency selection on page 17.

Entering a name – “Name”

Menu

SET

SET

 

Name

 

Name

Name

 

Lichael

 

Michael

 

 

Lichael

 

 

 

 

 

 

Call up “Name”

 

Enter a character

 

Enter a character;

 

 

 

and confirm

 

store the entry

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

“Stored”

 

 

SET

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Via the “Name” menu, you can enter a freely selectable name (e.g. the name of the performer) for the plug-on transmitter.

The name can be displayed on the standard displays “Frequency/Name” and “Name/Channel”. The name can consist of up to 8 characters such as:

•letters (without pronounciation marks),

•numbers from 0 to 9,

•special characters and spaces.

To enter a name, proceed as follows:

￿ Press the UP button (￿)/DOWN button (￿) to select a character.

SET ￿ Press the SET button to change to the next segment/ character or to store the complete entry.

Activating/deactivating the automatic lock mode – “Auto Lock”

 

 

 

 

 

SET

 

 

 

 

 

 

 

 

 

Menu

 

 

 

 

 

Auto Lock

 

 

 

Auto Lock

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Auto Lock

 

 

 

 

 

 

Active

 

 

 

 

 

Inactive

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Active

 

 

 

 

 

 

 

 

 

 

Store the setting

Call up “Auto

 

 

 

 

Select the desired

 

 

Lock”

 

 

 

 

setting

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

“Stored”

 

 

 

 

 

SET

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The lock mode prevents that the plug-on transmitter is accidentally switched off or programed during operation. The lock mode icon  on the current standard display indicates that the lock mode is activated.

￿ Press the UP button (￿)/DOWN button (￿) to select the desired setting.

For information on how to use the lock mode, refer to page 9.

The extended menu “Advanced Menu”

Setting transmission frequencies and the frequency bank “U” – “Tune”

When you have selected one of the system banks and then select the “Tune” menu, the plug-on transmitter automatically switches to channel 1 of the frequency bank “U”. In this case, “U.1” briefly appears on the display panel. Upon delivery, the channels of the frequency bank “U” are not assigned a transmission frequency.

Via the “Tune” menu item, you can set a transmission frequency to be stored in the current channel or you can select a different channel in the frequency bank “U” and assign it a transmission frequency. It is vital to observe the notes on frequency selection on page 17.

When you are in the “Tune” menu item, the RF signal is deactivated.

14