Sennheiser SKP 100 Using the plug-ontransmitter, Switching the plug-ontransmitter on/off

Using the plug-on transmitter

Using the plug-on transmitter

To establish a transmission link, proceed as follows:

1.Switch the diversity receiver on (see the instruction manual of the receiver).

2.Switch the plug-on transmitter on (see below).

The transmission link is established and the diversity receiver’s RF level display “RF” reacts.

Switching the plug-on transmitter on/off



To switch the plug-on transmitter on (online operation):

	￿ Press the ON/OFF button .
ON/OFF	The plug-on transmitter transmits an RF signal. The red
	ON LED  lights up and the standard display “Frequency/
	Name” appears on the display panel. The transmission icon 
	is displayed.
	You can switch the plug-on transmitter on and deactivate the
	RF signal on switch-on. For more information, see below.

To switch the plug-on transmitter off:

￿If necessary, deactivate the lock mode (see page 9).

	￿ Press the ON/OFF button	until “OFF” appears on	the
ON/OFF	display panel.
	The red ON LED  goes off and the display panel turns off.
	When in the operating menu, pressing the ON/OFF button		will
	cancel your entry (ESC function) and return you to the current
	standard display.

To switch the plug-on transmitter on and to deactivate the RF signal on switch-on(offline operation):

SET

SET

￿Press the SET button until “RF Mute On?” appears on the display panel.

￿Press the SET button.

The transmission frequency is displayed but the plug-on transmitter does not transmit an RF signal. The transmission icon  is not displayed.

533.875MHz  ew100 G3

AF P MUTE

Use this function to save battery power or to prepare a plug-on transmitter for use during live operation without causing interference to existing transmission links.

To activate the RF signal:

ON/OFF

SET

￿Press the ON/OFF button.

“RF Mute Off” appears on the display panel.

￿Press the SET button.

The transmission icon  is displayed again.

8