Adjusting settings via the operating menu

Activating/deactivating the pilot tone transmission – “Pilot Tone”

 

Advanced Menu

 

 

SET

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pilot

 

 

 

Pilot

 

 

 

 

 

 

 

 

 

 

Pilot Tone

 

 

 

 

 

 

Active

 

 

 

 

 

Inactive

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Call up

 

 

 

 

Select the desired

 

 

Store the setting

“Pilot Tone”

 

 

 

 

setting

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

“Stored”

 

 

 

 

 

SET

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The plug-on transmitter adds an inaudible pilot tone to the audio signal. The receiver detects and evaluates the pilot tone, and is thus able to identify the signal of the matching transmitter and mute all others. The pilot tone supports the receiver’s squelch function.

Devices of the ew 100 G1 series (generation 1) do not support the pilot tone function. Therefore, please observe the following when combining a transmitter or receiver of the ew 100 G3 series (generation 3) with devices from an earlier evolution wireless generation:

Transmitter

Receiver

 

Make sure to ...

 

w G3/

 

w G2

 

w G3/

 

w G2

... activate the pilot tone

 

 

 

 

 

 

 

 

function on both trans-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

mitter and receiver.

 

w G3

 

w G1

 

... deactivate the pilot tone

 

 

 

 

 

 

function on the ew 100 G3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

transmitter.

 

w G1

 

w G3

 

... deactivate the pilot tone

 

 

 

 

 

 

function on the ew 100 G3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

receiver.

 

 

 

 

 

 

 

 

 

Adjusting the contrast of the display panel – “LCD Contrast”

You can adjust the contrast of the display panel in 16 steps.

Loading the factory-preset default settings – “Reset”

SET

Advanced Menu Reset

ResetYes

Call up “Reset”

Select the desired

 

setting; apply the

 

setting

“Stored” SET

When resetting the plug-on transmitter, only the selected settings for the pilot tone and for the frequency bank “U” remain unchanged.

For an overview of the factory-preset default settings, refer to the supplied frequency information sheet.

Displaying the software revision – “Software Revision”

You can display the current software revision of the plug-on transmitter.

16