Using the plug-on transmitter
Switching the plug-on transmitter on/off
The transmitter can only be switched off when the standard display is shown on the display panel. When in the operating menu, briefly pressing the ON/OFF button will cancel your entry (ESC function) and return you to the standard display with the last stored settings.
Note:
Remove the batteries or the accupack when the transmitter will not be used for extended periods of time.
Press the ON/OFF button | to switch the transmitter |
on. The red LED lights up. |
|
To switch the transmitter off, press the ON/OFF button
until “OFF” appears on the display. The red LED goes off.
Muting the plug-on transmitter
The transmitter has a MUTE switch that noiselessly mutes the audio signal without switching the transmitter off.
Set the MUTE switch to the position ’MUTE’. The “MUTE” display appears on the display panel. Provided that the pilot tone function is activated on both the transmitter and the receiver, the “MUTE” display also appears on the receiver display panel.
12
