Sennheiser SKP 500 manual Indications and displays, LC display panel

Indications and displays

LC display panel

Alphanumeric display

“B.CH“ – appears when the channel bank and the channel number are displayed

“MHz“ – appears when the frequency is displayed

4-step battery status display

Lock mode icon

(lock mode is activated)

“PILOT” display

(pilot tone transmission is activated)

“MUTE” display (audio input is muted)

7-step level display for audio signal “AF”

Operation and battery status indication

The red LED (LOW BAT/ON) provides information on the current operating state of the plug-on transmitter:

Red LED lit up:	The plug-on transmitter is switched
	on and the capacity of the batteries/
	BA 2015 accupack is sufficient.
Red LED flashing:	The batteries are/the	BA 2015
	accupack is going flat (LOW BAT)!
In addition, the 4-step battery status display		on the

display panel provides information on the remaining battery/BA 2015 accupack capacity:

3 segments:	capacity approx. 100 %
2 segments:	capacity approx. 70 %
1 segment:	capacity approx. 30 %

Battery icon flashing: LOW BAT

8