Servis-Rhino 60C Mounting and Dismounting Buckets, Placing the Stabilizers, Boom Lock, Swing Lock

OPERATION

MOUNTING AND DISMOUNTING BUCKETS

Mount buckets using 1 x 6-5/8 anti-rotation pins (1), 5/16 x 2” cap screws (2) and lock nuts (3).

PLACING THE STABILIZERS

Set the stabilizers to remove weight from the rear wheels. Rear wheels are to remain touching the ground as this provides for the widest stabilizer stance and lowest center of gravity.

Raising the wheels off the ground will not only reduce stability and digging depth, but impair performance and impose unnecessary stress on the backhoe and tractor.

BOOM LOCK

Use boom lock when transporting backhoe.

1.Completely raise boom and lower dipperstick.

2.Secure boom using boom lock bracket.

STABILIZER LOCK

Use stabilizer lock when transporting backhoe.

1.Completely raise stabilizers.

2.Secure each stabilizer using stabilizer lock brackets.

OPERATION

SWING LOCK

Use swing lock when transporting or dismounting backhoe.

Position boom straight back and drop pin through holes in swing frame and mainframe. Store pin in bushing provided on mainframe.

F-4139 01/11 Operation Section 3-7

© 2011 Alamo Group Inc.