GETTING TO KNOW YOUR COMPACT CANISTER VAC
OPERATING INSTRUCTIONS
17
Motor Thermostat
Important: This vacuum cleaner is equipped with a motor protective thermostat. If for some reason your vacuum overheats, the thermostat will automatically turn the unit off. Should this occur, unplug the vacuum from the wall outlet and turn off the switch. Change the dust bag, clean the filters and check for blockages in hose and suction inlet. Allow the unit to cool for a minimum of 45 minimum prior to restarting the unit. To restart,
Power Cord
Your vacuum cleaner includes a power cord, which is automatically retractable. To extend your power cord, pull from rear and extend to desired length. A yellow mark on the power cord shows the ideal cable length. Don’t pull the power cord beyond the red mark. When cleaning is finished, first switch off power and disconnect plug from electrical outlet. Then press on cord rewind button. (Fig. 11) If the cord does not fully retract, pull it out again and then press on cord rewind button.
Tool Storage
Your vacuum cleaner has a tool storage compartment. The upholstery brush and the crevice tool with brush are stored here. (Fig. 12)
Fig. 12
1. | Main Unit | 9. | Crevice Tool with Brush |
2. | Storage Compartment Release | 10. | Floor To Carpet Brush |
| Button | 11. | Flexible Hose |
3. | Storage Compartment Cover | 12. | Manual Suction Control |
4. | Cord Rewind Button | 13. | Hose Inlet |
5. | On/Off Button | 14. | Parking Position Hook |
6. | Full Bag Indicator | 15. | Extension Tube Parking |
7. | Extension Tubes (x2) |
| Receptacle |
8. | Upholstery Brush | 16. | Disposable Paper Bags |
|
| 17. | Air Driven Turbo Brush |
Technical Specifications
Voltage: | 120V., 60Hz. |
Power: | 10.8 Amps |
Illustrations may differ from actual product.
2
Fig. 11
7
