Baldor E100 manual 2 24VDC control circuit supply input, Motor output power, Regeneration

www.supportme.net

8.1.2 24VDC control circuit supply input (X2)
		Unit	3A	6A	9A
	Nominal input voltage	VDC		24
	Minimum input voltage			20
	Maximum input voltage			30
	Maximum ripple	%		±10
	Maximum continuous current @24VDC	A		0.6
	Power on surge current (typical)	A		4
	@24VDC, 100ms

8.1.3 Motor output power (X1)
		Unit	3A	6A	9A
	Nominal phase current	ARMS	3	6	9
	Peak phase current	ARMS	6	12	18
	for 3s
	Nominal output	VA	1195	2390	3585
	@ 230V, 3Φ
	Output voltage range (line-line)	VRMS		0 - 230
	@VDC-bus=320V
	Output frequency	Hz		0 - 2000
	Output dV/dt	kV/µs
	at drive, phase-phase			2
	at drive, phase-ground			1.1
	at motor (using 20m cable), phase-phase			1.9
	at motor (using 20m cable), phase-ground			1.8
	Nominal switching frequency	kHz		8.0
	Minimum motor inductance (per winding)	mH		1
	Efficiency	%		>95

8.1.4 Regeneration (X1)

	Unit	3A		6A	9A
Nominal switching threshold (typical)	VDC		on: 388, off: 376
Nominal power	kW		0.25
(10% power cycle, R=57Ω)
Peak power	kW		2.7
(10% power cycle, R=57Ω)
Maximum regeneration switching current	APK		10
Minimum load resistance	Ω		39
Maximum load inductance	µH		100

MN1942 Specifications 8-3