www.supportme.net
6.5.3 Other tools and windows
Each tool and window is explained fully in the help file, so is not described here in detail.
HEdit & Debug Tool
This tool provides a work area including the Command window and Output window. The Command window can be used to send immediate Mint commands to the MicroFlex e100. If you tried the test move in section 6.4.4, then you have already used Edit & Debug mode.
HScope Tool
Displays the capture screen. This screen is also shown when the
HSpy window
Allows you to monitor all the important parameters for the axis.
Remember, for help on each tool just press F1 to display the help file, then navigate to the Mint WorkBench book. Inside this is the Toolbox book.
MN1942 | Configuration |
