www.supportme.net
6.5.2 Parameters tool
The Parameters tool can be used to view or change most of the drive’s parameters.
1.Click the Parameters icon in the Toolbox on the left of the screen.
The main area of the Mint WorkBench window displays the Parameters editor screen.
2.In the parameters tree, scroll to the required item. Click on the small + sign beside the item’s name.
3.The adjacent table will list the parameters for the chosen item.
Scroll to the required entry.
Click in the Active Table cell and enter a value. This immediately sets the parameter, which will remain in the
MicroFlex e100 until another value is defined. The icon to the left of the item will change from green to yellow to indicate that the value has been changed.
Many of the MicroFlex e100’s parameters are set automatically by the Commissioning Wizard, or when tests are performed in the
| MN1942 |
