Shark MV2010WC manual Vacuum Mode, Storage, Emptying the Dust CUP

Vacuum Mode

2

1

3

	English
3	4
	5

2

1 6

STORAGE

1Place your foot lightly on the top of the base. Tilt cleaning unit into the upright position.

2Turn off the vacuum power button and unplug the unit.

3Wrap cord around cord holders and secure plug. Store cleaning unit in an upright position.

6 TOLL FREE: 1-800-798-7398

MV2010WC_11_IB_ENG_100803.indd 6-7

IMPORTANT: Always carry the Vac-Then- Steam™ by the cleaning unit collar; rather than by the handle.

EMPTYING THE DUST CUP

1Press the dust cup latch at the bottom of the canister upward. Pull the dust cup assembly out and down.

2Twist dust cup cover counter- clockwise to open.

3Tap canister gently over trash receptacle to empty.

NOTE: Over time debris may gather in the conical filter of your Vac- Then-Steam™ and this may reduce your vacuum’s performance. Clean the filter often for optimal suction performance.

4Remove the filter frame from the filter canister. Tap the filter canister gently over trash receptacle to empty the cone.

5To reattach the dust cup cover, align the indicators that are printed on the rear of the dust cup and cover. Turn the cover clockwise and make sure the solid arrows are aligned before reinserting the dust cup into the vacuum.

6To replace the dust cup in to the unit, gently push the dust cup assembly up and in. The dust cup will click into place.

www.SharkVacThenSteam.com 7

04/08/10 9:38 AM