Shark S3501WC manual Care of Your Steam Mop, After USE and Storage

Care of Your Steam Mop

AFTER USE AND STORAGE

1When you have finished using the steam mop, and your floors are clean, unplug the cord from the outlet and move it into an upright position. Let the unit cool 2-3 minutes and release steam by pumping the handle several times before removing the micro- fiber cleaning pocket from the mop head.

1

2

3

English

2

1

2Remove the micro-fiber cleaning pocket by releasing the quick fasteners and using the lavender loop on the side of the pocket, avoiding contact with the hot pocket or dirt. Then empty the water tank.

IMPORTANT: Be very careful because the cleaning pockets can get very hot from the steam, so use caution when removing them. Let the unit cool 2-3 minutes.

3To store the Shark® Steam Mop hanging up; first remove the head (after it has cooled and the steam has been released) then hang on a large hook.

NOTE: If you want to store it standing upright then make sure it’s leaning against a wall for added support and safety. Always store your Steam Mop with the micro-fiber pocket removed, away from children or high traffic areas.

KEEPING YOUR MICRO-FIBER CLEANING POCKET AS GOOD AS NEW

1We recommend washing your micro- fiber pockets separately from other fabrics to avoid picking up lint.

Only use liquid detergent.

(no powder detergent) Don’t use any fabric softeners or bleach.

Line dry or dry on a low dryer setting.

2If there are loose threads on the pocket carefully cut the thread with scissors. Don’t pull on them or cut at the base.

8 TOLL FREE: 1-866-538-6109

S3501WC_IB_English_100119.indd 8-9

www.sharkclean.com 9

1/19/10 2:48 PM