Trouble Shooting
PROBLEM | POSSIBLE | SOLUTIONS | |
REASONS | |||
|
| ||
| The steamer is not | Verify that the green light on the | |
| unit is lit. If not, check that the unit | ||
| turned on. | ||
There is no | is plugged in and the on/off button | ||
| |||
There is not enough | is raised and in the “On” position. | ||
steam. |
| ||
water in the unit. | Verify that the water line is above | ||
| |||
|
| ||
|
| the “Refill” line. If not, add more | |
|
| water to the tank. | |
|
|
| |
|
| Lift the nozzle so that the hose is | |
| There is condensation | vertical for a few minutes or until | |
There is not | buildup in the hose. | steam starts again. | |
enough steam. | There is not enough | Verify that the water line is above | |
| water in the unit. | the “Refill” line, if not add more | |
|
| water to the tank. | |
|
|
| |
|
| It is recommended to use the | |
|
| steam bonnet on the nozzle to | |
| You are not using the | prevent water drops being left | |
| on the garment and to improve | ||
The nozzle | steam bonnet. | ||
performance. | |||
| |||
leaves water | The steam bonnet is | After letting the steam nozzle cool, | |
drops on the | too wet. | ||
remove the steam bonnet and let it | |||
garment. |
| ||
There is condensation | dry out before using again. | ||
|
Hang the nozzle on the door hook while the garment steamer is heating up.
5
6
Quick Start
|
| buildup in the hose. | Lift the nozzle so that the hose is | |
|
|
| ||
|
|
| vertical for a couple minutes or until | |
|
|
| steam starts again. | |
|
|
| ||
A gurgling or |
| Lift the nozzle so that the hose | ||
bubbling noise | There is condensation | is vertical for a couple minutes | ||
is coming from | buildup in the hose. | or until steam starts again. It is | ||
recommended that the hose is | ||||
the hose |
|
| ||
or unit. |
|
| vertical during use. | |
|
|
| ||
10 | TOLL FREE: |
| ||
STRAP IN
6OPTIONAL: Snap the shoulder strap hooks onto the connecting rings on the unit body. The detachable shoulder strap allows for greater freedom of movement when both hands are needed for various steaming tasks.
IMPORTANT: Hose, nozzle and accessories can become hot during use. Scalding or burns may occur from coming into contact with hot water or steam.
IMPORTANT: Empty the
water from the water tank after every use
www.sharkcompany.com
