SharkRack Enclosure Installation Guide
Adjusting the Leveling Feet
Step | Detail |
The leveling feet help stabilize the cabinet and keep the cabinet level on uneven floors. This should be done before you install products into the cabinet.
1.Locate the (4) leveling feet. There is one in each corner as shown.
2.Loosen the Jam Nut.
Figure 18
42U X 37DP Shown
3.Lower the leveling feet. Rotate the leveling feet clockwise from inside the cabinet using a straight blade screwdriver or from underneath the cabinet using the supplied 9/16” wrench. The levelers should plant firmly to the floor.
Figure 19
42U X 37DP Shown
REV D, ECO2773 | Page 21 of 46 |