SharkRack Enclosure Installation Guide
How to Remove or Install Side Panels
Step | Detail |
The Side Panels can be removed to provide further access to equipment mounted inside the cabinet. This is a great way to get added access for cable management or installing powerstrips.
To remove a Side Panel:
1.Unlock the Side Panel using the key, if necessary.
2.Slide both Side Panel latches inward towards each other at the same time and tilt the panel outward.
Note: If using a grounding kit, remove the cable prior to lifting the panel from the Cabinet Frame. See “Installing a Grounding Kit” for details.
3.Release the latches and lift the Side Panel up and off the cabinet frame.
4.Remove the Side Panel and set aside.
To install a Side Panel:
1.Approaching the cabinet from the side, set the bottom edge of the Side Panel onto the Cabinet Frame
2.The bottom edge of the panel must securely engage with the cabinet frame before pushing the top of the panel forward into place.
3. Lock the panel using the key, if preferred. | Figure 26 |
| |
| 42U X 37DP Cabinet Shown |
REV D, ECO2773 | Page 26 of 46 |