SharkRack Enclosure Installation Guide

Installing the Floor Mounting Brackets

Step

Detail

The Floor Mounting Brackets should be used when sliding equipment in and out of the cabinet and no other stabilizing provisions are in place. This safety feature is used to prevent the cabinet from tipping over or to keep it in a fixed location. Consult a contractor or trained professional on the best method of fastening your cabinet to the floor.

1.Prepare the location. Check the location to make sure the area is suitable to bolt down the cabinet. (Refer to Site Preparation Information).

Figure 22

Floor Mounting Bracket

2.Secure the Floor Mounting Brackets to the front and rear of the cabinet base using supplied hardware.

3.Have a qualified professional fasten the brackets to your data center floor.

OR

Figure 23

Floor Mounting Bracket on 42U X 37DP cabinet

ID-00210-000

REV D, ECO2773

Page 23 of 46