KVM-8 I nstaller/User Guide
12
Basic Operations
13
Press Enter to accept the new channel. The following command line shows the proper
format used to switch your active channel via keyboard.
Key Sequence Action
<CM>Addr<Enter> Selects an active channel via keyboard
Below is a sample of a keyboard switching session, with an accompanying explanation
for each step.
Key Sequence Action
1. <CM>4<Enter> Selects channel 4 on the base unit as the acti ve channel.
2. <CM>3<Enter> Selects the KVM Switc h attached to channel 3 on the base
unit, then selects channel 5 on the cascaded uni t.
3. <CM>6<Enter> Selects channel 6 on the base unit as the acti ve channel.
4. <CM>21<ESC> Exit Command Mode. Th e instruction is not executed.
channel 6 is still the active channel.