EZ SETUP during First Power On
LWhen you turn on the TV for the first time, it will automatically memorize the broadcasting channels.
Please perform the following instructions before you press the power button.
(1)Insert the batteries into the remote control. (See page 5)
(2)Connect the antenna cable to the TV set. (See page 6)
(3)Plug in the AC POWER cord to the wall outlet.
POWER
VOLUME
CHANNEL UP (8)/ DOWN (9)
MENU
1 Press the POWER button on the TV set or on the Remote Control to turn on the TV. The SELECT LANGUAGE mode will be displayed.
(On the Set)
(SELECT LANGUAGE mode)
2 Press CH UP (8) or DOWN (9) to select “ENGLISH”, “SPANISH (ESPAÑOL)” or “FRENCH (FRANÇAIS)”.
3 Press VOL (+) or
(EZ SETUP mode)
4 Press VOL (+).
The tuner will automatically search for the broadcasting and cable TV channels. (The CH No. will automatically increase when it appears.)
If you want to stop the EZ SETUP process once it has started, press VOL
If you want to SETUP again, please refer to page 23 on SETUP.
To cancel EZ SETUP
Press VOL
5 Once EZ SETUP is completed, the lowest channel number memorized will be displayed.
NOTE:
•If EZ SETUP does not memorize all the channels in your region, please refer to page 24 for more information on manually memorizing the channels using CHANNEL MEMORY.
•It may be difficult to PRESET when the broadcasting signals are weak, or multiple stations are received on the same channel. Please refer to pages 25 - 26 for more information on manually memorizing additional channels using CHANNEL MEMORY.
10
