Sharp 25N-M100 warranty Saving broadcast TV channels into memory, Start, Stop

Set Up (Continued)

LSaving broadcast TV channels into memory.

1.1 Press MENU to access MAIN MENU screen, then press CH UP (8) or DOWN (9) to move the “” mark to “SET UP”.

1.2 Press VOL (+) or (–)to access SET UP mode, then press CH UP (8) or DOWN (9) to move the “” mark to “CH SETTING”.

1.3	Press VOL (+) or (–)to access CH
1.4	SETTING screen.
	Press CH UP (8) or DOWN (9) to	→
	move the “ ” mark to “CH SEARCH”,
	then press VOL (+) or (–)to access CH

SEARCH mode.

→

→

(CH SETTING mode)

START (START)

2.1 Press VOL (+). The tuner will search through all available channels in your area and add them into the TV’s memory.

(STOP)

STOP

2.2 Press VOL (–). CH SEARCH will stop at

the current channel and will not add any higher channels.

2.3 Press MENU to exit.

(CH SEARCH screen)

LAdding weak or additional channels or erasing unwanted channels from TV memory.

1.1 Press MENU to access MAIN MENU screen, then press CH UP (8) or DOWN (9) to move the “ ” mark to “SET UP”.

1.2 Press VOL (+) or (–)to access SET UP mode, then press CH UP (8) or DOWN (9) to move the “ ” mark to “CH SETTING”.

1.3 Press VOL (+) or (–)to access CH SETTING mode, then press CH UP (8) or DOWN (9) to move the “ ” mark to “CH MEMORY”.

→

→

(CH SETTING mode)

→

2.1 Press VOL (+) or (–)to access CH MEMORY.

2.2 Use CH UP (8) or DOWN (9) or REMOTE KEYPAD to select each

desired channel to add or erase.

or

2.3 Press VOL (+) to add a channel to the TV’s memory or press VOL (–)to erase a channel from the TV’s memory.

25