Sharp 25N-M100 1, 3, 2, 1, 1 2, 4

20
LTo change the V-CHIP BLOCK setting. (Secret No. is registered.)
1Repeat steps 1 - 3 of [1] MPAA RATING, then “INPUT SECRET
No.” will be displayed.
2Enter the 4-digit SECRET No. using the REMOTE KEYPAD
and the V-CHIP select mode will be displayed. Repeat
configuration of the V-CHIP BLOCK.
LIf you intend to change or have forgotten your Secret No., clear the original Secret No.
and set up a new one.
1Repeat steps 1 - 3 of [1] MPAA RATING, or 1 - 2 of [L To cancel
the V-CHIP BLOCK screen while V-CHIP BLOCK has been
activated], then “INPUT SECRET No.” will be displayed.
2Press and hold both VOL (+) and CH DOWN ( 9 ) on the TV set
simultaneously until the message “INPUT SECRET No.”
disappears.
3Press MENU two times to exit.
[3]-A. Additional mode (DOWNLOAD)
There will be an additional new rating system. In that case, please set up as follows.
Subsequently the new rating system will set up automatically.
1Repeat steps 1 - 3 of [1] MPAA RATING.
2Press CH UP ( 8 ) or DOWN ( 9 ) to move the “ ” mark to
“DOWNLOAD”.
3Press VOL (+) or (–) to “DOWNLOAD : ON”.
4Repeat pressing MENU to exit.
(On the set)
VOL(+) / CH DOWN(9)
9CH 8
-VOL +
Parent Control (V-CHIP Operation Continued)