Watching TV

Simple button operations for changing channels

You can change channels in several ways.

Method 1

Using CH r/s on the remote control unit or on the TV.

Method 2

1 Press FLASHBACK to switch to the previously tuned channel.

2 Press FLASHBACK again to switch back to the currently tuned channel.

•FLASHBACK will not work if no channel has been changed after the TV is turned on.

Method 3

Using remote control buttons 0-9, • (DOT) to select channels for VHF/UHF/CATV/DIGITAL.

To select a 1 or 2-digit channel number (e. g., Channel 5):

Press 5sENT

•When selecting a 1-digit channel number, it is not necessary to press 0 before the number.

•When you enter 0-9only, channel selection will be made if there is no operation within a few seconds.

To select a 3-digit channel number (e. g., Channel 115):

Press 1s1s5sENT

To select a 4-digit channel number (e. g., Channel 22.1):

Press 2 s2s • (DOT) s1sENT

•When you enter 0–9only, channel selection will be made if there is no operation within a few seconds.

•If you push “0” by itself, nothing will happen.

•Complete the above steps within a few seconds.

•When you enter 0–9and • (DOT), channel selection will be made if there is no operation within a few seconds.

Displaying the receiving channel information

Press DISPLAY once. The display appears

1 as shown on below. If the viewing channel is a digital channel, the information of channel number, audio service type, broadcast station, program information and V-Chip rating will appear.

 

 

 

 

 

 

Cable DIGITAL

 

 

Cable ANALOG

 

98.3

 

 

7

 

Audio: STEREO

 

 

Audio:MONO

 

CC:(Off)

 

 

CC:--

 

Ratings:NONE

 

 

Ratings:NONE

 

 

 

 

 

(While viewing digital

(While viewing analog

channel)

channel)

Press DISPLAY again to return to normal

2 screen.

•The channel information will disappear if there is no operation within a few seconds.

18