Useful adjustment settings
AV MODE
AV MODE gives you 7 viewing options to choose from to best match the surrounding environment of the TV, which can vary due to factors like room brightness, type of program watched or the type of image input from external equipment.
1 | Press AV MODE. | |
• Current AV MODE displays. | ||
| ||
2 | Press AV MODE again before the mode | |
displayed on the screen disappears. | ||
| ||
| • The mode changes as shown below. |
When the input source is TV, INPUT 1, 2 or 3 terminals
(Example)
Selected item | Description |
|
|
STANDARD | For a highly defined image in a normal |
| lighting |
| [Enhanced Picture Contrast: on] |
|
|
MOVIE | For a movie |
| [Enhanced Picture Contrast: off] |
|
|
GAME | Lowers image brightness for easier viewing |
| [Enhanced Picture Contrast: off] |
|
|
PC | For PC |
| [Enhanced Picture Contrast: off] |
|
|
USER | Allows the user to customize settings as |
| desired. You can set the mode for each |
| input source. |
| [Enhanced Picture Contrast: off] |
|
|
DYNAMIC | Changes the image and sound settings to |
(Fixed) | the factory preset values. No adjustments |
| are allowed. |
| [Enhanced Picture Contrast: on] |
|
|
DYNAMIC | For a |
| contrast, useful for sports viewing |
| [Enhanced Picture Contrast: on] |
|
|
When the input source is INPUT 4, 5 or 6 terminals
(Example)
•You can select a different AV MODE item for each input mode. (For example, select STANDARD for TV input and DYNAMIC for INPUT 1.)
•“Enhanced Picture Contrast” technology detects the source video characteristics and smoothly adjusts the screen brightness accordingly to realize deeper black levels.
Input Signal (for Analog PC input mode only)
Some input signals may have to be registered manually to display properly.
The pair of input signals (resolutions) in the list below are not distinguishable when received. In such case, you have to set the correct signal manually. After setting once, it will display when the same signal (resolution) is input again.
1024g7681360g768
•You can only select the “Input Signal” on the Setup menu when receiving one of the 2 input signals listed above.
1Press MENU to display the MENU screen, and then press c/d to select “Setup”.
2Press a/b to select “Input Signal”, and then press ENTER.
3Press a/b to select the desired input signal on the display.
4Press MENU to exit.
42