Basic adjustment settings

Channel memory setting

1

Press MENU to display the MENU screen, and

then press c/d to select “Setup”.

 

2

Press a/b to select “CH Setup”, and then

press ENTER.

 

 

• If you already set the Secret No., input the 4-digit

 

secret number here. See page 45 for setting a

 

secret number.

3

Press a/b to select “CH Memory”, and then

press ENTER.

4

Press a/b to select ANALOG (Air), ANALOG

(Cable), DIGITAL (Air) or DIGITAL (Cable), and

 

 

then press ENTER.

5

When viewing ANALOG broadcasts:

1 Press c/d to select the channel to skip,

 

 

and then press b to move down.

 

2 Press c/d to select “On”, and then press

 

ENTER.

 

When viewing DIGITAL broadcasts:

 

1 Press a/b to select the channel to skip,

 

and then press c/d to select “On”.

•On: Skips channels. (Channel selection disabled using CH r/s.)

•Off: Does not skip channels. (Channel selection enabled using CH r/s.)

6

Press MENU to exit.

 

• Make sure what kind of connection is made with your TV.

3

Press a/b to select “Signal Strength”.

 

• The signal strength of DIGITAL channel is

 

 

 

 

displayed. The signal information is based on the

 

 

current channel.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

Press MENU to exit.

 

Channel Strength

The channel signal strength can also be checked separately.

1

 

Repeat steps 1 and 2 in Signal Strength in

 

Antenna Setup - DIGITAL

 

 

2

 

Press a/b to select “Channel Strength”, and

then press ENTER.

 

3

 

Input the 2-digit channel number to check the

 

signal strength of the selected channel.

 

 

 

 

• Make sure the signal is strong enough for each

 

 

channel.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Antenna Setup - DIGITAL

In order to receive digital air broadcasts, you need a digital broadcast antenna. You can confirm the antenna configuration through the “Antenna Setup - DIGITAL” screen.

If necessary, adjust the direction of the antenna to obtain the maximum signal strength.

Signal Strength

1

Press MENU to display the MENU screen, and

then press c/d to select “Setup”.

 

2

Press a/b to select “Antenna Setup -

DIGITAL”, and then press ENTER.

 

4

Press MENU to exit.

 

• This function is available for DIGITAL (Air) only.

26