Sharp 26D42UW, LC-26D43U manual 34

Using external equipment

Displaying an image from HDMI equipment

1	To watch an HDMI/PC-IN equipment image,
	select “INPUT4 or INPUT5” from “INPUT
	SOURCE” menu using INPUT on the remote
	control unit or on the TV.

2	Press MENU to display the MENU screen, and
	then press c/d to select “Option”.
3	Press a/b to select “HDMI Setup”, and then
	press ENTER.

4	Press a/b to select the desired item and
	press ENTER.
5	Press a/b/c/d to select the desired setting
	and press ENTER.
HDMI		Selectable
Setup			Description
		items
items
Auto View		Enable	Set whether or not to use
		Disable	View Mode based on signal
			recognition, including an HDMI
			signal.
Audio		Digital	Select “Digital” for an audio
Select		Analog	signal via the HDMI terminal.
			Select “Analog” for an audio
			signal via the R-AUDIO -L
			terminal.

6 Press MENU to exit.

Input Skip

This setting allows you to skip the HDMI/PC-IN Input on the Input Selection operation.

1	Press MENU to display the MENU screen, and
	then press c/d to select “Setup”.
2	Press a/b to select “Input Skip”, and then
	press ENTER.
3	Press a/b to select the Input (INPUT 4,
	INPUT 5 or INPUT 6) you wish to skip, and

then press ENTER.

4	Press c/d to select “Yes”, and then press
	ENTER.
5	Press MENU to exit.

•Refer to your external equipment operation manual for the signal type.

•“Audio Select” is only available for INPUT 5.

•When connecting an HDMI-DVI conversion adapter/cable to the HDMI terminal, the image may not come in clearly.

33