- 9 -
Initial Settings
The message PLEASE CHECK ANTENNA CABLE AUTO.
PROGRAMMING SYSTEM will be displayed when you turn
on your TV for the first time.
Note: If you connect Video Recorder to your TV via antenna
input (ANT socket); totune the VCR channel
automaticallyyou must set the VCR in play mode before you
start APS.
1- Select LANGUAGE with  or   button, then press
the   or   button to select a menu language.
2- Select COUNTRY with   or   button, then press the
 or   button to select the correct country.
? : OTHER N : NORWAY
D : GERMANY SF : FINLAND
A : AUSTRIA UK : UNITED KINDOM
CH : SWITZERLAND NL : NETHERLANDS
I : ITALY P : PORTUGAL
F : FRANCE E : SPAIN
B : BELGIUM TR : TURKEY
DK : DENMARK EIR : IRELAND
S : SWEDEN
3- Press the   or   buttons to selectTuning Mode. This
allows you to choose how you run the APS. If you select
Channel Tuning Mode, the APS will run through the chan-
nel numbers for your area to locate TV stations. Alterna-
tively if you select Frequency Tuning Mode APS will run
through all the frequencies to locate TV stations.
4- Select START with   or   button, then press the 
button to start A.P.S.
A.P.S., (Automatic Programming System) automatically pro-
grammes the received channels in your TVs programme
numbers. During A.P.S., A.P.S. IS RUNNING PLEASE
WAIT will be displayed. After A.P.S. is finalized, the PRO-
GRAM. menu appears.
To cancel A.P.S., press the   button.
You can delete a channel, insert a channel into a programme
number, or re-start A.P.S. with the PROGRAM. menu. For de-
tails, see PROGRAM. (Programming) menu on page 15.

Operating with the onset buttons

Volume setting and programme selection can be made using
the buttons on the right side of the TV.
Volume Setting:
 Press   button to decrease volume or   button
to increase volume, so a volume level scale will be dis-
played on the screen.
Programme Selecting:
 Press CH  button to select next programme or  CH
button to select the previous programme.

Operating with Remote Control

The remote control handset of your TV is designed to control
all the functions of the model you selected. The functions will
be described in accordance with the menu system of your TV.
Functions which you can use out of menu system are de-
scribed below.
Volume Setting:
Press + button to increase volume.
Press -  button to decrease volume.
Programme Selecting (Previous or next programme):
 Press -P/CH button to select the previous programme.
 Press P/CH+ button to select the next programme.
Programme Selecting (direct access):
Press digit buttons on the remote control handset to select
programmes between 0 and 9. TV will switch to the selected
program after a short delay.
 For a two digit program number press  -/-- button. Press
the first digit and then second digit of the programme chan-
nel you want to watch.
Menu System
Your TV has been designed with a menu system. Display
MENU (main menu) and enter one of five menus (SOUND,
PICTURE, FEATURE, INSTALL. and PROGRAM.).
1- Press M button to display MENU (main menu). The
menu titles will be displayed in the main menu.
2- Press   or   button to select a menu title, then press
 or   button to enter the menu.
 To exit a menu, press button.
 To go to the previous menu, press M button.
ENG-2862W-3262W-1548UK-2SCART-FAV-SVHS-AK45-SHARP-TV-1.p65 21.01.2004, 08:289