- 15 -
 To store the station to the programme number selected, se-
lect STORE option using   or   button and then press
 or   button or press OK button.
 Now as you had selected the Frequency Search, the tuning
mode of the program is stored as Frequency Search Mode.
Note : Channel Search Tuning Mode uses a channel table.
The channels and stations at the table may vary from table to
table and from country to country. Each channel has an ex-
act frequency on the table.
 Frequency Search Tuning Mode does not use a channel
table and it is slower than Channel Search Tuning Mode.
 Channel Search Tuning Mode is recommended for the
countries which uses standard channel table.
 Frequency Search Tuning Mode recommended for the
countries which uses non-standard channel table.
Program. (Programming) Menu
You can use the Program. (Programming) menu to delete a
channel, to change the programme number of a channel, to
give a channel name to a channel, and to start the A.P.S
(AUTOSTORE) function.
 Press M button to display the main menu.
 Press   or   button to select PROGRAM. item, then
 or   button to display the PROGRAM. menu.

To choose a channel in the PROGRAM. menu:

 Press   /  /   /   button. The programme number
that you choose is high-lighted in the PROGRAM. menu
and you can view the picture of that channel.
Caution:
Using the DELETE or INSERT function it is possible to re-
write the current channel list in the PROGRAM menu. This
can cause other channels to be changed if they were former-
ly in locations affected by this function.

To give a channel name (NAME):

1. Choose the channel you want to give a channel name.
2. Press the RED button to enter the NAME mode.
3. Press   or   button to choose the position, and press
 or   button to choose each character of channel
name.
4. Press the RED button to store the channel name.
 To cancel the NAME mode, press the BLUE button.

To delete a channel (DELETE):

1. Choose the channel you want to delete.
2. Press the YELLOW button to enter the DELETE mode.
3. Press the YELLOW button to delete it.
 To cancel this DELETE mode, press the BLUE button.

To change the programme number of a channel

(INSERT):

1. Choose the channel you want to change the programme
number.
2. Press the GREEN button to enter the INSERT mode.
3. Press   /  /   /   button to choose new
programme number.
4. Press the GREEN button to insert the channel to the cho-
sen programme number.
 To cancel this INSERT mode, press the BLUE button.
To start A.P.S (AUTOSTORE)
A.P.S. automatically programmes the received channels in
your TVs programme numbers.
1. Press the BLUE button to enter the AUTOSTORE mode.
A warning message appears.
 To cancel the AUTOSTORE mode, press the   but-
ton.
2. Press   or   button to choose the COUNTRY, then
press   or   button the choose country you are now lo-
cated.
3. By pressing the up and down buttons, come to the Tuning
Mode item and select the mode at which your TV will run
the APS.
4. Press   or   button to choose the CONTINUE, then
press   button to start A.P.S. The following message ap-
pears.
 To cancel the A.P.S., press the   button.
5. After A.P.S. is finalized, the PROGRAM. menu appears
again.
ENG-2862W-3262W-1548UK-2SCART-FAV-SVHS-AK45-SHARP-TV-1.p65 21.01.2004, 08:2815