Sharp 743BM user manual DVI IN port, RGB IN port, Kensington Lock, Cable holding ring

Introduction

Connect the power cord for your monitor to the POWER port on the back of the monitor.

AUDIO IN

Connect the audio cable for your monitor to the audio port on the back of your com- puter.

DVI IN port

Connect the DVI Cable to the DVI IN port on the back of your monitor.

RGB IN port

Connect the D-sub cable to the 15-pin, RGB IN port on the back of your monitor.

Kensington Lock

The Kensington lock is a device used to physically fix the system when using it in a public place. (The locking device has to be purchased separately.) For using a locking device, contact where you purchase it.

Note

See Connecting Cables for further information regarding cable connections.

Cable holding ring

•Fix the cables using the holding ring, as shown in the figure.

12