Set-Up, Install the TD cartridge | Sharp AL-1610 specs

SET-UP

GETTING STARTED

Set-up

Remove all pieces of tape. Then open the platen

1 cover and remove the protective material.

2 Use a coin (or suitable object) to remove the screw.

Store the screw in the paper tray as described in step 6 because it will be used if the copier has to be moved. (p. 42)

3 Install the TD cartridge.

●For installation of the TD cartridge, see steps 1 to 2 and steps 4 to 7 of TD CARTRIDGE REPLACEMENT on pages 24 and 25.

4 Gently lift and pull out the paper tray until it stops.

5 Remove the pressure plate lock. Rotate the pressure plate lock in the direction of the arrow to remove it while pressing down the pressure plate of the paper tray.

11

Image 13

Sharp AL-1610 operation manual Set-Up, Install the TD cartridge

Contents

AL-1600 AL-1610 For Your Protection Contents Safety Precautions Main Features Part Names and Functions Part Names and Functions Alarm indicators AUTO/MANUAL/PHOTO / / key and indicators pInterrupt key and indicator p Power Save indicator p Initial settings 6START key and indicator2Zoom keys p 3Copy ratio display key p Do not install your copier in areas that are Copier Installation Getting Started Unpacking Checking Packed Components and Accessories SET-UP Install the TD cartridge SET-UP Turn the power switch on Load copy paper Push the paper tray firmly back into the copier Loading Copy Paper Loading Copy Paper Push gently the right side of the front cover to open Cover TD Cartridge Replacement TD Cartridge Replacement To remove it Lift the TD cartridge lock release lever and pullCartridge out until the green strap handle can be grasped By the right hand. Lift the cartridge by the handle while Drum Cartridge Replacement Misfeed in the bypass tray Misfeed RemovalMisfeed in the copier Misfeed in the paper feed area Misfeed Removal Arrow Turn the roller rotating knob in the direction Close the side cover by pressing the handle on the cover Misfeed in the paper tray User Programs Setting the user programsList of user programs User Programs Preheat mode Power Save ModesAuto power shut-off mode Setting the power save modes Power Save ModesCopying from the preheat mode Original table and platen cover User MaintenanceBypass tray paper feed roller Transfer charger Charger cleaner out by holding the tab User MaintenanceGently lift and pull out the paper tray and take Copier TROUBLE? Problem Solution Copier TROUBLE? Self-diagnostic functionExample Types and sizes of copy paper SuppliesSupply part numbers Supply list Genuine supplies statement SuppliesProper storage Store the supplies in a location that is Moving Instructions Turn the power switch off and disconnect the power CordGently lift and pull out the paper tray until it stops Specifications Specifications Index Index Material Safety Data Sheet Special Fire Fighting Procedure Ignition TemperatureFlash Point Method Used Flammable Limits Other Limits Ingredients CAS No ProportionHealth Hazards None required under normal use Memo Memo For users in the USA Sharp Corporation