Sharp AL-1610 operation manual User Programs, List of user programs, Setting the user programs

User programsGENERAL INFORMATION

USER PROGRAMS

The user programs allow the parameters of certain functions to be set, changed, or canceled as desired.

		List of user programs
		This copier has the following user programs.
Program No.	Program name	Description
1	Auto clear time	Sets the auto clear time. The copier returns to the initial settings
		when the auto clear time elapses after the last copy is made.
2	Preheat mode	Sets the time that elapses before the copier enters the preheat
		mode after any operation is made. See page 34.
3	Auto power shut-off	Sets the time that elapses before the copier enters the auto power
	timer	shut-off mode after any operation is made. See page 34.
5	Auto power shut-off	Enables or disables the auto power shut-off mode. See page 34.
	setting
21	Paper size setting	Sets the copy paper size in the tray.

Setting the user programs

Press and hold the light ( ) key for more than 5

1 seconds until all the alarm indicators ( , , , and ) blink and “– –” appears in the copy quantity display.

Enter a program number using the left copy quantity

2 ( ) key.

● The selected program number will blink in the copy quantity display.

●If a mistake is made in steps 2 to 4, press the CLEAR ( ) key. The copier will return to step 2.

● The program numbers are shown in the table above.

For example, to change the setting of the auto power shut-off timer, enter 3.

Press the START ( ) key.

3 ● The entered program number will be steadily lit on the left side of the copy quantity display and the currently selected parameter number for the program will blink on the right side.

32