Sharp AL-1610 operation manual Loading Copy Paper, Push the paper tray firmly back into the copier

LOADING COPY PAPER

To save space, this copier has been designed with an adjustable front-loading tray, which is easily opened for paper loading. For best results, use only SHARP recommended paper. (See page 40.)

The paper required ( ) indicator will light up when there is no copy paper in the selected paper feed station, or when the paper tray is not installed or is improperly installed.

If you change the copy paper size in the tray, be sure to set the paper size using user program No. 21. See page 32.

GETTING STARTED

1

2

3

Maximum height line

Gently lift and pull out the paper tray until it stops.

Push the pressure plate down until it locks in place.

Fan the copy paper and insert it into the tray. Make sure the edges go under the corner hooks.

●If you change to a different size of copy paper, the tray must be adjusted. See the next page.

●Set the paper along the guides.

●The tray holds up to 250 sheets of 21 lb. bond paper. Do not load paper above the maximum height line.

Loading copy paper

4 Push the paper tray firmly back into the copier.

13