SET UP THE SOFTWARE
48
5Double-click the "setup" icon ( ).
6The "SOFTWARE LICENSE" window will appear. Make sure
that you understand the contents of the software license, and
then click the "Yes" button.
7Read the "Readme First" in the "Welcome" window and then
click the "Next" button.
Set the IP Address
This setting is only required once when us ing the machine on a network.
8Click the "Set the IP
Address" button.
If the language selection screen appea rs after you double click the
"setup" icon, select the l anguage that you wish to use and click the
"Next" button. (Normally the correc t language is selected
automatically.)
To set the IP address of the machine, follow the steps below. If the
machine is already connected to the network and its IP address has
been set, go to "LPR (TCP/IP) direct printing" (p.50).
Note
Note
AL-1655CS.book 48 ページ 2004年8月23日 月曜日 午後1時48分