
85
8
TD CARTRIDGE REPLACEMENT
When toner is low, the error indicator will light up and "TD CARTRIDGE IS NEAR
EMPTY." will appear in the display. For information on purchasing a new TD
cartridge, see "ABOUT SUPPLIES AND OPTIONS" (p.92). If copying is continued
while the indicator is lit, copies will gradually become lighter until the toner runs out.
When the toner runs out, the machine will stop operating, the error indicator will
blink, and "REPLACE THE TD CARTRIDGE" will appear in the display. Follow the
procedure below to replace the TD cartridge.
1Open the bypass tray, and then open
the side cover while pressing the side
cover open button.
2Push gently on both sides of the front
cover to open the cover.
3Gently pull the TD cartridge out while
pressing the lock release button.
•After the machine stops, it may be possibl e to make a few more
copies by taking the TD cartridge out of the machine, shaking it
horizontally, then reinsta lling it. If copying is no t possible after this
operation, replace the TD cartri dge.
•During a long copy run of a dar k original, "TONER
REPLENISHMENT IN PROGRESS" appears in the display, and t he
machine may stop even though toner is left. The machine will feed
toner up to 2 minutes and then the re ady indicator will ligh t up. Press
the [START] key ( ) to resume copying.
•After removing the TD cartridge, do not shake it or tap on it. Doing so
may cause toner to leak from the cartridge. Put the old cartridge
immediately in the bag contained in t he box of the new cartridge.
•Dispose of the old TD cartridge in accorda nce with local regulations.
Note
Lock release button
Caution
AL-1655CS.book 85 ページ 2004年8月22日 日曜日 午後6時44分