SPECIAL FUNCTIONS
This chapter describes the special functions of this copier. Use these functions as needed.
DESCRIPTION OF SPECIAL FUNCTIONS
Toner save mode (page 19)
Reduces toner consumption by approximately 10%.
Power save modes (page 20)
The copier has two power save modes of operation: preheat mode and auto power
●Preheat mode
When the copier enters the preheat mode, the power save ( ) indicator will light up and other indicators will remain on or off as before. In this condition, the fuser in the copier is maintained at a lower heat level, thereby saving power. To copy from the preheat mode,
make desired copier selections and press the print ( | ) key using the normal copying |
procedure. |
|
●Auto power shut-off mode
When the copier enters the auto power 
) indicator will light up and other indicators will go out. The auto power
than the preheat mode but requires a longer time before starting copying. To copy from the
auto power 
) key. Then make desired copier selections and press the print (
) key using the normal copying procedure.
Auto clear (page 20)
The copier returns to the initial settings a preset amount of time after the last copy is made. This preset amount of time (auto clear time) can be changed.
3
Special functions
TONER SAVE MODE
Press the exposure mode selector key to select the manual ( | ) mode. |
19
