OPERATION PANEL

Exposure mode selector key and indicators

Use to sequentially select the exposure modes: AUTO, MANUAL or PHOTO. Selected mode is shown by a lit indicator. (p. 14)

Light and dark keys and exposure indicators

Use to adjust the MANUAL or PHOTO exposure level. Selected exposure level is shown by a lit indicator. (p.14)

Use to start and terminate user program setting. (p. 20)

Alarm indicators

: Developer replacement required indicator (p. 29)

: Misfeed indicator (p. 26)

: Toner cartridge replacement required indicator (p. 22)

: Maintenance indicator (p. 29)

SPF indicator (p. 38)

SPF misfeed indicator (p. 38)

Copy ratio selector key and copy ratio indicators

Use to sequentially select preset reduction/ enlargement copy ratios.

Selected copy ratio is shown by a lit indicator. (p. 16)

Zoom indicator (p. 16)

Copy ratio display (%) key (p. 15)

Display

Displays the specified copy quantity, zoom copy ratio, user program code, and error code.

ON LINE indicator

Lights up when the machine is used as a printer. To use the copier as a printer, an optional printer expansion kit is needed.

1

Getting started

ON LINE key

Changes between the on-line and off-line modes when the PCL expansion kit has been installed and a PCL printer is used. Changes modes from the off-line to on-line when the GDI expansion kit has been installed and a GDI printer is used.

DATA indicator

Indicates that the printer is receiving or processing print data.To use the copier as a printer, an optional PCL expansion kit is needed.

Power save indicator

Lights up when the copier is in a power save mode. (p. 19, 20)

Tray select key

Use to select a paper feed station (paper tray or bypass tray). (p. 17)

Paper feed location indicators

Light up to show the selected paper feed station.

Zoom keys

Use to select any reduction or enlargement copy ratio from 50 to 200% in 1% increments. (p. 15)

Copy quantity keys

Use to select the desired copy quantity (1 to 99). (p. 15)

Use to make user program entries. (p. 20)

Clear key

Press to clear the display, or press during a copy run to terminate copying. (p. 13)

Press and hold down during standby to display the total number of copies made to date. (p. 21)

Print key and ready indicator

Copying is possible when the indicator is on.

Use to set a user program.

7

Page 9
Image 9
Sharp AR-151 operation manual Operation Panel