STATUS INDICATORS
When the following indicators light up or blink on the operation panel or the following alphanumeric codes appear in the display, solve the problem immediately referring to both the table below and the relevant page.
Be sure to use only genuine SHARP parts and supplies.
Indication |
| Cause and remedy | See |
|
| page: |
| ||
|
|
|
| |
Developer replacement | Steadily | Developer is required. Contact your SHARP | 29 |
|
required indicator | lit | service center as soon as possible. |
|
|
|
|
|
|
|
Toner cartridge | Steadily | Replacement of toner cartridge will be needed | 22 |
|
lit | soon. Obtain a new cartridge. |
|
| |
replacement |
|
| ||
| Toner cartridge must be replaced. Replace it | 22 |
| |
required indicator | Blinking |
| ||
| with a new one. |
|
| |
Misfeed indicator | Blinking | A misfeed has occurred. Remove the misfed | 26 |
|
paper referring to the description of “ Misfeed |
|
| ||
|
| removal”. |
|
|
Maintenance | Steadily | Service by an authorized SHARP service | 29 |
|
indicator | lit | technician is required. |
|
|
|
|
|
|
|
SPF misfeed | Blinking | An original misfeed has occurred in the SPF. | 38 |
|
Remove the misfed originals referring to the |
|
| ||
indicator |
|
| ||
| description of “ Misfeed in the SPF” . |
|
| |
|
|
|
| |
|
|
|
|
|
The paper tray indicator | The paper tray is not installed properly. | _ |
| |
is blinking. |
| Push the tray into the copier securely. |
|
|
|
|
|
|
|
|
| The toner cartridge is not installed. Install the | 22 |
|
“CH” is blinking in the display. toner cartridge. If “ CH” is blinking even if the cartridge is installed properly, contact your
|
| SHARP service center immediately. |
| |
|
|
|
| |
| “ CH” is steadily lit in the | Side cover is open. Close the side cover | _ | |
| display. | securely by pressing the round projections |
| |
| near the side cover open button. |
| ||
|
|
| ||
|
|
|
| |
|
| Paper tray or bypass tray is empty. Load copy | 10 | |
| “ P” is blinking in the display. | paper. |
| |
|
|
| ||
A misfeed has occurred in the paper tray or | 26 | |||
|
| |||
|
| bypass tray. Remove the misfed paper. |
| |
|
|
|
| |
| A letter and a number appear | The copier will not function. Turn the power | _ | |
| alternately. | switch off, remove the power cord from the |
| |
| outlet, and contact your SHARP service center. |
| ||
|
|
|
5
Copier trouble?
31
