3
Special functions
TONER SAVE MODE
Press and hold down the exposure mode selector key for approximately 5 seconds.
The manual (
) indicator will go out and the photo (
) indicator will begin to blink. The exposure indicator marked “5” will light up, indicating the standard toner mode is active.
To enter the toner save mode, press the light (
) key.
The exposure indicator marked “1” will light up, indicating the toner save mode is selected.
Press the exposure mode selector key twice.The photo (
) indicator will stop blinking and the AUTO indicator will light up steadily. The toner save mode is now active.
To return to the standard mode, repeat the procedure but use the dark (
) key to select exposure level “5” in step 3.
USER PROGRAMS (power save modes, auto clear time, stream feeding mode)
The user programs allow the parameters of certain functions to be set, changed, or canceled as desired.
Setting the power save modes and auto clear time
Press and hold down the light (
) and dark ( 5 seconds until all the alarm indicators ( 
, the display.
) keys simultaneously for more than , 
and 
) blink and “–
Use the left copy quantity (
) key to select a user program number (1: auto clear
time, 2: preheat mode, 3: auto power
20
