Sharp AR-122E, AR-152E 6, 1, 2, 3

23

5

6Close the front cover and

then the side cover by

pressing the round

projections near the side

cover open button. The

indicator will go out and the

start ( ) indicator will light

up.

TONER CARTRIDGE LIFE

To find out the approximate quantity of toner remaining, follow the procedure

described below.

1Press and hold down the light ( ) and dark ( ) keys

simultaneously for more than 5 seconds until all the alarm

indicators ( , , , ) blink and " " appears in the

display.

2Press and hold down the copy ratio display (%) key for more thn

5 seconds.

The approximate quantity of toner remaining will be indicated in the display

as a percentage ("100", "75", "50", "25" or "10" is displayed). When the

percentage is less than 10%, () will be displayed.

3Press the light ( ) or dark ( ) key.

All alarm indicators wil go out.

When closing the covers,

be sure to close the front

cover securely and then

close the side cover. If the

covers are closed in the

wrong order, the covers

may be damaged.

Even after a new toner cartridge is installed, the start ( ) indicator

may not light up, indicating copying cannot be restarted (toner is not

sufficiently fed). In this case, open and close the side cover. The

copier will feed toner again approximately 2 minutes and then

copying can be restarted.

Contents

Main Page 1 CAUTIONS Cautions on using Warning: Caution: Cautions on handling Cautions on laser Proper storage for supplies Trademark acknowledgements CONTENTS 1INTRODUCTION 6 7 2LOADING PAPER 1 4 USING THE MANUAL Conventions used in the manual 5 PART NA MES Single bypass Photoconductive drum Toner cartridge 6 OPERATION PANEL 2 7 PAP ER 8 LOADING THE PAPER TRAY 1 2 3 4 10 BYPASS FEED (including special paper) Print face 1 2 copy (print face down) into the feed slot of the single bypass. Note for loading envelopes 3 11 COPY FLOW 1 Make sure that paper has been loaded in the paper tray (p.8), and check the paper size (p.7). 2 Turn on the unit (p.12). 3 Place the original. 1 2 Power on About the scan head Initial settings of operation panel Power off methods Page 15 SET THE COPY QUANTITY EXPOSURE ADJUSTMENT/PHOTO COPYING Exposure adjustment 1 2 Automatic exposure adjustment 1 2 3 4 17 1 2 select the desired copy ratio. 3 4 18 DESCRIPTION OF SPECIAL FUNCTIONS TONER SAVE MODE 1 2 19 3 4 USER PROGRAMS 2 3 4 20 5 6 DISPLAYING TOTAL NUMBER OF COPIES 1 2 5 21 TONER CARTRIDGE REPLACEMENT 1 2 3 4 5 23 6 TONER CARTRIDGE LIFE 1 2 3 Page Page 6 26 This chapter describes misfeed removal and troubleshooting. TROUBLESHOOTING 27 STATUS INDICATORS 28 MISFEED REMOVAL 1 2 A: Misfeed in the paper feed area 1 2 B: Misfeed in the fusing area 1 2 3 C: Misfeed in the transport area 1 2 3 4 OPTIONAL EQUIPMENT (AL-12PKM) 32 CD-ROM SOFTWARE FOR THE SHARP PERSONAL MFP SERIES MFP driver 33 HARDWARE AND SOFTWARE REQUIREMENTS BEFORE INSTALLATION Flow of installation 35 INSTALLING THE SOFTWARE Installing onto Windows XP (USB/parallel interface) 2 4 5 installed on the screen, and then click the "Start" button. 6 setup (This step will start if it was selected in step 4). 1 7 8 9 10 11 12 Installing onto Windows 98/Me/2000 (USB interface) 2 4 5 6 7 8 1 2 3 4 2 4 5 6 7 setup (This step will start if it was selected in step 4). 6 1 2 8 selected in step 4). 1 2 3 45 INDICATORS ON THE OPERATION PANEL SCANNER indicator ONLINE indicator Start indicator 1 2 3 4 How to print 1 4 media type, and print quality, and then click the "Print" button to start printing. About interrupt copying 48 USING THE SCANNER MODE 1 2 3 4 1 2 3 4 5 Scan Parameter Setting Dialog Box Flow of the Button Manager setting Page 1 2 3 4 Opening the scanner driver and scanning from your computer 1 2 Page 1 2 3 4 5 1 2 3 4 Page 58 USING OTHER INSTALLED DRIVERS 1 2 3 4 5 6 1 2 3 Page 8 61 SPECIFICATIONS Optional equipment Printer/Scanner Expansion Kit (AL-12PKM) Page 64 INDEX A B C M N O P R INDEX BY PURPOSE SOFTWARE LICENSE 2. Restrictions. 3. Termination. 4. Export Law Assurances. 5. Government End Users. 6. Limited Warranty on Media. 7. Disclaimer of Warranty on Software. 8. Limitation of Liability. 9. Controlling Law and Severability. 10. Complete Agreement.