Sharp AR-5320 Before Installation, Hardware And Software Requirements, Operating system, Cable

!install_ar5316_5320.book 3 ページ ２００３年１２月２日 火曜日 午前９時４２分

BEFORE INSTALLATION

HARDWARE AND SOFTWARE REQUIREMENTS

Check the following hardware and software requirements before installing the software.

Computer type	IBM PC/AT or compatible computer equipped with a USB 1.1*1 or bi-directional parallel
	interface (IEEE 1284)
Operating system*2	Windows 95, Windows 98, Windows Me,
	Windows NT Workstation 4.0 (Service Pack 5 or later)*3,
	Windows 2000 Professional*3, Windows XP Professional*3,
	Windows XP Home Edition*3
Other hardware requirements	An environment on which any of the operating systems listed above can fully operate

*1 Compatible with Windows 98, Windows Me, Windows 2000 Professional, Windows XP Professional or Windows XP Home Edition preinstalled models equipped with a USB interface as standard.

*2 Printing is not available in MS-DOS mode.

*3 Administrator's rights are required to install the software using the installer.

INSTALLATION ENVIRONMENT AND INSTALLATION PROCEDURE

Follow the appropriate installation procedure for your operating system and type of cable as indicated below.

Operating system	Cable	Procedure to follow
Windows XP	USB/Parallel	INSTALLATION IN WINDOWS XP (USB/PARALLEL CABLE) (p. 4)
Windows 98/Me/2000	USB	INSTALLATION IN WINDOWS 98/Me/2000 (USB CABLE) (p. 5)
Windows 95/98/Me/	Parallel	INSTALLATION IN WINDOWS 95/98/Me/NT 4.0/2000 (PARALLEL CABLE) (p. 6)
NT 4.0/2000

3