3 |
SCAN
Scanning Overview
The flow chart shown below provides an overview of scanning.
Caution |
The environment in which the machine's scanning function can be used is subject to certain limitations. For details, see "BEFORE INSTALLATION" in the Software Setup Guide.
Scanning from a | Scanning from the "Scanner and | Using the machine to begin scanning*3 | |
or | Camera Wizard" (Windows XP) | ||
|
Place the original in the scanning position
☞For more information, refer to "NORMAL COPYING" in the Operation Manual.
Start up a |
| Start up the "Scanner and |
| Camera Wizard" from "Control | |
select the machine's scanner |
| Panel" in your computer. |
|
|
|
Set the scan preferences
Change the machine to scanner mode and press a scan menu key (1 to 6).
Set the scan preferences
(only if the preferences are set to appear)
Scanning
☞Scanning from a
Scanning
☞Scanning from the "Scanner and Camera Wizard" (Windows XP)
*1 TWAIN is an international interface standard for scanners and other image acquisition devices. By installing a TWAIN driver on your computer, you can scan and work with images using a variety of
*2 WIA (Windows Imaging Acquisition) is a Windows function that allows a scanner, digital camera or other imaging device to communicate with an image processing application. The WIA driver for this machine can only be used in Windows XP.
*3 To scan using the machine's operation panel, you must first install Button Manager and establish the appropriate settings in the Control Panel. For details, see "SETTING UP BUTTON MANAGER" in the Software Setup Guide.
CONTENTS | I N D E X | 20 |
|
|
|
