3
SCAN
Outline of Button Manager
Button Manager is a software utility that links scanning functions to the scanner key on the machine. The Button Manager software allows you to assign scan settings to each of the six scan menu keys on the machine.
To view Help for a setting, click the 
button in the upper
☞To begin scanning using the machine's operation panel, settings must be established in the Control Panel after Button Manager is installed. For information on installing Button Manager and establishing the Control Panel settings, see "SETTING UP BUTTON MANAGER" in the Software Setup Guide. For information on scanning using the machine's operation panel, see "USING THE SCANNER MODE" in the Operation Manual.
1
2
3
4
1Tab
Click to set scan menu options. Each tab contains scan settings for the scan menu keys (SC1 through SC6) on the machine.
2"Application Selection" area Select the
3"Show TWAIN setting screen when scanning" Checkbox
You can select whether or not the TWAIN screen is shown. When the checkbox is selected, the TWAIN screen appears when scanning is executed to let you adjust the scanning conditions.
4"Scan Setup" area Set the scan conditions.
● Some applications
Note | may limit your |
| |
| choice of settings. |
●When "Show TWAIN setting screen when scanning" is selected, the scan conditions cannot be selected.
5"OK" button
Click to save your settings and exit the dialog box.
6"Cancel" button
Click this button to exit the dialog box without making any changes to the settings.
7"Apply" button
Click to save your settings without closing the dialog box.
|
| 8 | "Help" button |
|
|
| Click this button to display the |
|
|
| help file for Button Manager. |
You can use Button Manager to select and change the functions of the six scan menus. Refer to Button Manager Settings. | |||
|
|
|
|
C O N T E N T S | I N D E X | 31 | |
|
|
|
|
