Sharp AY-AP09DJ, AE-A09DJ operation manual Timer Operation, Timer OFF, COOL/DRY Mode, Heat Mode

TIMER OPERATION

TIMER OFF

The unit will turn off automatically according to your setting.

Timer duration can be set from minimum 0.5 hours (30 minutes) to maximum 12 hours.

Up to 9.5 hours, you can set by 0.5 hours (30 minutes) increments and from 10 to 12 hours, by 1 hour increment.

MODE TEMP.

Point the remote control at the signal receiver win- dow on the unit.

1 Press the TIMER OFF ( ) button and set time as desired.

		• The time setting will change as you to press the
FAN	TIMER	button as follows.

TEMP.		0.5h	1.0h	1.5h	10h	11h	12h
DISPLAY MODE		Hold the button pressed down for fast setting.
1h FAN	1	• The orange TIMER lamp (				) on the unit will
		light.
SWING CANCEL		• The unit will generate a beep when it receives the
		signal.
		• The time setting will count down to show remain-
		ing time.

Example : When you wish to stop the operation 2.5 hours later.

TIPS ABOUT TIMER OFF OPERATION

When the TIMER OFF is set, the temperature setting is automatically adjusted to prevent the room from becoming excessively hot or too cold while you sleep. (Auto Sleep function)

COOL/DRY MODE:

•One hour after the timer operation begins, the temperature setting rises 1°C higher than the original thermostat setting.

TO CANCEL TIMER

Press the CANCEL button.

• The	orange
TIMER lamp		DISPLAY MODE
(	) on the	1h FAN
unit	will turn
off.		SWING CANCEL

HEAT MODE:

•One hour after the timer operation begins, the temperature setting drops 3°C lower than the original thermostat setting.

NOTE:

•The Auto Sleep function will not activate during the FAN ONLY mode.

TO CHANGE TIMER SETTING

Press the TIMER button which you wish to change, (TIMER OFF or TIMER ON) and change the time setting.

12