Sharp AE-A09DJ, AY-AP09DJ operation manual Maintenance, Cleaning The Unit And The Remote Control

MAINTENANCE

Be sure to disconnect the power cord from the wall outlet or turn off the circuit breaker before performing any maintenance.

CLEANING THE FILTERS The air filters should be cleaned every two weeks.

		1 TURN OFF THE UNIT
1		2 REMOVE THE FILTERS
		1	Lift the open panel.
2	3	2	Push the air filters up slightly to unlock them.

3Pull the air filters down to remove them.

3 CLEAN THE FILTERS

Use a vacuum cleaner to remove dust. If the filters are dirty, wash them with warm water and a mild detergent. Dry filters in the shade before reinstalling.

4 REINSTALL THE FILTERS

3

2

1

1 Reinstall the filters in the original positions.

2 Close the open panel.

3 Push the arrow-marked of the panel firmly to lock it in place.

CLEANING THE UNIT AND THE REMOTE CONTROL

•Wipe them with a soft cloth.

•Do not directly splash or pour water on them. It can cause electrical shock or damage.

•Do not use hot water, thinner, abrasive powders or strong solvents.

MAINTENANCE AFTER AIR CONDITIONER SEASON

1 Operate the unit in the FAN ONLY mode for about half a day to allow the mechanism to thoroughly dry.

2 Stop the operation and unplug the unit. Turn off the circuit breaker, if you have one exclusively for the air condi- tioner.

3 Clean the filters, then reinstall them.

MAINTENANCE BEFORE AIR CONDITIONER SEASON

1 Make sure that the air filters are not dirty.

2 Make sure that nothing obstructs the air inlet or outlet.

3 Check the outdoor mounting rack periodically for wear and to make sure it is firmly in place.

15