Sharp AE-A09DJ, AY-AP09DJ operation manual Timer On, 0.5h, 1.0h

TIMER ON

The unit will turn on automatically according to your setting.

Timer duration can be set from minimum 0.5 hours (30 minutes) to maximum 12 hours.

Up to 9.5 hours, you can set by 0.5 hours (30 minutes) increments and from 10 to 12 hours, by 1 hour increment.

MODE TEMP.

FAN TIMER

TEMP.

Point the remote control at the signal reciever win- dow on the unit.

1	Press the TIMER ON (				) button.
	• The time setting will change as you press the button
	as follows.
	0.5h	1.0h	1.5h	10h		11h	12h

Hold the button pressed down for fast setting.

DISPLAY MODE	1	• The orange TIMER lamp (	) on the unit will light.
		• The unit will generate a beep when it receives the
1h FAN		signal.
SWING CANCEL		• The time setting will count down to show remaining
		time.

Example : When you wish the room temperature to be as desired 6.5 hours later.

Select the mode, temperature, fan speed setting and PLASMACLUSTER operation as desired.

•When the temperature is set with the TIMER ON, the temperature will show in the display for 5 sec- onds and then return to the time display.

•If you do not change the setting, the unit will oper- ate with the latest setting.

•The unit will turn on prior to the set time to allow the room to reach the desired temperature by the programmed time. (Awaking function)

NOTES FOR TIMER SETTING AND OPERATION

•The latest time setting will be memorized and will appear on the remote control display the next time you set the TIMER OFF or TIMER ON.

•TIMER OFF and TIMER ON can not be set together. The latest set TIMER will be active.

•When ONE-HOUR OFF TIMER is set, TIMER OFF and TIMER ON will not be available.

•When ONE-HOUR OFF TIMER is set during TIMER OFF or TIMER ON duration, the TIMER ON or TIMER OFF will be cancelled.

13