Sharp 10P03-CH-NG, TINSEA548WJQZ, BD-HP70U Turning the Power On, Turning the power on, Entering standby, Indicators on the Player

Before Starting Playback
Turning the Power On
Turning the power on
Press POWER on the remote control or on the Player
to turn on the power of the Player.
NOTE
When you turn on this player for the first time after
purchase or when you turn on this player after you perform
“System Reset” (see page 52), the language setting screen
will be displayed, so please perform the language setting
(see step 4 of page 23).
•
Entering standby
Press POWER on the remote control or on the Player
to enter standby.
If you press POWER again immediately after entering
standby, the Player may not turn on. If this happens, wait
for 10 seconds or more and then turn on the power again.
NOTE
When the POWER indicator is blinking (may take some
time), the Player cannot be turned on.
•
Indicators on the Player
POWER (ON/STANDBY) indicator
Green on Power on
Red blinks Preparing for standby
Red on Standby
AQUOS PURE MODE indicator
Green on Output in AQUOS PURE
MODE (See page 24.)
BD/DVD/CD mode indicator
Blue on Playing back
Blue blinks Loading a disc
•
22
POWER
BD/DVD/CD mode indicator
AQUOS PURE MODE indicator
POWER (ON/STANDBY) indicator
OPEN/CLOSE