Sharp BD-HP90S Information on MAC addresses, Confirm your setting Access Point Security key

SETTINGS

12Select “Next”, then press ENTER.

13For testing after confirming the settings, select “Test”, then press ENTER.

•If the test has failed, an error message appears. Retry to perform the settings after checking that the connection (page 23) is performed properly.

Confirm your setting.

Access Point: XXXXXXXXXXXX

Security key: XXXXXXXXXXXX

Test

14Follow steps 6–11 of “When using a LAN Cable” on page 45 to complete the network connection settings.

Information on MAC addresses

A MAC address is a unique ID number for network equipment. A MAC address is necessary for MAC address filtering on the wireless router/access point.

Before the wireless communication setup is performed, we recommend writing down the MAC address and keeping it in a safe place. (The MAC address is displayed on the “Setting the info. of the Ethernet” screen when wireless communication is set (See step 5 of page 46).)

MAC address

Settings

47