CD-MPS660E

System connections (continued)

Preparation for Use

10

!AC power connection

After checking all the connections have been made correctly, plug the AC power lead of this unit into the wall socket. If you plug in the unit first, the unit will enter the demonstration mode.

Wall socket

(AC 230 - 240 V, 50 Hz)

Notes:

"The unit will start the tape initialisation when plugged in to the AC socket. During this process, initialising sound will be heard and the unit cannot be turned on. Wait until the process is finished.

"Unplug the AC power lead from the wall socket if the unit will not be in use for a prolonged period of time.

Cooling fan:

This product is equipped with a cooling fan inside, which begins to run at a specified volume level for better heat radiation.

!Demonstration mode

The first time the unit is plugged in, the unit will enter the demonstration mode. You will see words scroll.

To cancel the demonstration mode: When the unit is in the power stand- by mode (demonstration mode), press the X-BASS/DEMO button.

The demonstration mode will be cancelled and the display will disap-

pear.

To return to the demonstration mode:

When the unit is in the power stand-by mode, press the X-BASS/ DEMO button again.

Note:

When the power is on, the X-BASS/DEMO button can be used to se- lect the extra bass mode.

!External FM aerial

Use an external FM aerial if you require better reception. Consult your dealer.

External FM aerial

03/12/19 CD-MPS660E(A)1.fm

TINSZA040AWZZ

Page 10
Image 10
Sharp CD-MPS660E operation manual AC power connection, Demonstration mode, External FM aerial