Setting the clock
3
In this example, the clock is set for the
1Press the
2Press the CLOCK/TIMER button.
3Within 10 seconds, press the
or 
button to se- lect "CLOCK", and press the MEMORY/SET button.
4Press the 
or 
button to select
"0:00" | The |
| (0:00 - 23:59) |
"AM 12:00" | The |
| (AM 12:00 - PM 11:59) |
"AM 0:00" | The |
| (AM 0:00 - PM 11:59) |
5Press the 
or 
button to adjust the hour and then press the MEMORY/SET button.
Press the 
or 
button once to advance the time by
1hour. Hold it down to advance continuously.
6Press the 
or 
button to adjust the minutes and then press the MEMORY/SET button.
Press the 
or 
button once to advance the time by
1minute. Hold it down to change the time in
To confirm the time display:
[When the unit is in the
The time display will appear for about 10 seconds.
[When the power is on]
Press the CLOCK/TIMER button.
Within 10 seconds, press the 
or 
button to display the time. The time display will appear for about 10 seconds.
Note:
The "CLOCK" will appear or time will flash to confirm the time dis- play when the AC power supply is restored after a power failure or unplugging the unit. If incorrect, readjust the clock as follows.
To readjust the clock:
Perform "Setting the clock" from step 1. If the "CLOCK" does not appear in step 3, step 4 (for selecting the
To change the 24-hour or 12-hour display:
1Clear all the programmed contents. [Refer to "Clearing all the memory (reset)" on page 36 for details.]
2Perform "Setting the clock" from step 1.
Note:
The clock can also be set with the remote control.
3
Basic Operation
13
03/12/19 | TINSZA040AWZZ |
